This profile is an extruded aluminium copy of one of the oldest gutter designs (Pattern 46). Its high flow capacity makes it also ideal for large commercial and industrial buildings. Unlike the Victorian Ogee profile, this range does not utilise sockets and spigots, but internal joint connectors to extend the gutter run. The range includes four widths, 100mmx76mm, 125mmx100mm, 150mmx100mm and 200mmx150mm

Extruded Ogee gutters are suitable for direct fix, or fascia bracket fixing at maximum 900mm centres, with extra fixings where required. Expansion co-efficients are incorporated into the gutter design.

Gutter Lengths
Length	100mm x 76mm (4″ x 3″)	125mm x 100mm (5″ x 4″)	150mm x 100mm (6″ x 4″)	200mm x 150mm (8″ x 6″)
3m
2.5m
2m
1m
0.5m

Angles
Angle	100mm x 76mm (4″ x 3″)	125mm x 100mm (5″ x 4″)	150mm x 100mm (6″ x 4″)	200mm x 150mm (8″ x 6″)
External Angles 90°
Internal Angles 90°
External Angles 135°
Internal Angles 135°
Non Standard Angles
All Corners equal width of gutter plus 150mm

Oulets
Oulet	100mm x 76mm (4″ x 3″)	125mm x 100mm (5″ x 4″)	150mm x 100mm (6″ x 4″)	200mm x 150mm (8″ x 6″)
Outlets – 63mm Ø
Outlets – 75mm Ø
Outlets – 100mm Ø
Outlets – 75mm x 75mm
Outlets – 100mm x 75mm
Outlets – 100mm x 100mm
Outlets 225mm long

Stop Ends / Unions
Ends / Unions	100mm x 76mm (4″ x 3″)	125mm x 100mm (5″ x 4″)	150mm x 100mm (6″ x 4″)	200mm x 150mm (8″ x 6″)
Stop Ends – Right Hand
Stop Ends – Left Hand
Joint Connector

Brackets
Brackets	100mm x 76mm (4″ x 3″)	125mm x 100mm (5″ x 4″)	150mm x 100mm (6″ x 4″)	200mm x 150mm (8″ x 6″)
Fascia Brackets
Rafter Brackets – Top Fix
Rafter Brackets – Side Fix
Rise & Fall Brackets